Important Safety Alerts

Medical device manufacturer, Guangzhou Sunray Medical Apparatus Co., Ltd., has issued a medical device safety alert concerning its Maternal and Fetal Monitor [Model: SRF618X9, STAN S41; Article Number: P1271-05044].

The manufacturer had received several complaints of intermittent inaccurate ultrasound-derived fetal heart rate recordings by the Maternal and Fetal Monitor (Model: SRF618X9, software version 3.5 and 3.8).

According to the manufacturer, the root cause has been identified to be software-related. The inaccurate ultrasound-derived fetal heart rate recordings may lead to none or delayed intervention, resulting in severe injury or death to the fetus.

The manufacturer has corrected this issue in software version 3.9 which will:

• Change the principle regarding which fetal heart rate values are interconnected with a line in the CTG trace;
• Increase specificity of presented fetal heart rate values from ultrasound recording. The change is intended to reduce the ratio of false fetal heart rate values presented when the input signal is weak, i.e. when no audible feedback from the fetal heart heard through can be heard through the loudspeaker.

The affected users are advised to take the following actions:

• Contact the service representative to schedule the upgrade of the system;
• During monitoring, the users should note that the on-going evaluation of the recorded trace requires regular confirmation that the trace represents true fetal heart rate;
• During the monitoring, if there is any concern that the fetal heart rate tracing is not accurate, take additional steps to confirm the fetal heart rate by using:
  • An obstetric stethoscope;
  • Ultrasound imaging;
  • A fetal scalp electrode.

According to the local supplier, the affected products are not distributed in Hong Kong.

If you are in possession of the affected products, please contact your supplier for necessary actions.

Posted on 22 June 2018